If you have Falcon AND door alarms, your gate cannot integrate with our Storable Easy. This is because our software has no place for alarm information, so the alarm data is not transferred correctly to Falcon's system.
Follow the instructions below to set up your PTI Falcon gate integration with Storable Easy.
1. Log in to Storable Easy and install the Gate Sync Program.
2. When setting up your Gate Sync Program, make sure to put your facility code in. The facility code can be found at the bottom of your "Gate" page in the Storable Easy software, SETUP>Gate (API Key=Facility Code).
Save File location: You will enter a different save file depending on which Falcon you are using:
F2000: For the "Save File", if you are using the F2000 software, make sure you put C:\PTI\pti.dat (
Taskmaster: For "Save File", if you are using the Taskmaster software, make sure you put C:\F2000\pti.dat
3. Click Save (this will close the window).
4. If you are using F2000 software, click on the interface. It is a teal logo with an M. You can find it under the Home menu > PTI folder:
5. Make Sure Interface is Active checkbox is checked
6. Acct Software set to "Generic."
7. Preprocessor should be set to "PTIDAT"
8. Input File should be set to "C:\F2000\PTI.DAT
9. Result File should be set to "C:\F2000\RESULTS.DAT
10. Invalid Name Field Characters may halt the communication. The only valid keyboard character that F2000 accepts are apostrophes, other characters such as &,*,",-,?,!,/ etc...are considered invalid and may cause your communication to not work properly.
Troubleshooting
Your computer may need to be on the Microsoft .NET 4.5 framework if you are having problems with your Easy Gate sync software.
Communication from other external software programs (previous management systems) needs to be halted for the ESS gate sync post-download action to work.
Duplicate gate codes can be used in the PTI Falcon.
PTI Management Interface quits responding after a while. All you need to do is click on the blue M on the taskbar to wake i tback up.
